Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Find the harnesses under the bench and disconnect<br />
them all. Don’t worry about mixing<br />
them up. They are all keyed to only connect<br />
to their proper mate.<br />
Most harnesses connect with locking receptacles,<br />
like the one shown below. Simply<br />
squeeze the “wings” on either side and<br />
pull the connectors apart. Do not pull on the<br />
wires.<br />
A few of the connectors have a wire tie<br />
around them. This wire tie is removable and<br />
does not need to be cut.<br />
10 - Epic 442 Assembly and User Manual<br />
Note: You may fi nd it helpful to label the<br />
cables for ease and speed of reassembly. A<br />
simple number on the connector with a felt<br />
tip pen works great.<br />
30065-02A