Limited Lifetime Warranty - ETS Tan Tanning Bed Parts
Limited Lifetime Warranty - ETS Tan Tanning Bed Parts
Limited Lifetime Warranty - ETS Tan Tanning Bed Parts
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
8<br />
Installation - Assembly Procedures<br />
Attaching Gas Springs<br />
1. The gas springs are shipped with<br />
locking clips installed. Use a screwdriver<br />
to pry back the locking clips<br />
on the gas springs as they are<br />
installed. (See right)<br />
2. With a helper holding the canopy<br />
open, align open ends of gas spring<br />
ball joints with pivot studs and push<br />
into place. Be sure rod end is down as<br />
shown. DO NOT lower canopy until<br />
both gas springs are engaged! Failure<br />
to engage locking clips may result in<br />
the ball joints working loose, allowing<br />
the canopy to fall, which may cause<br />
serious injury!<br />
PIVOT STUD<br />
BALL JOINT<br />
3. Lift and lower canopy a few times to<br />
lubricate gas springs for optimum<br />
performance.<br />
LOCKING CLIP<br />
SCREWDRIVER<br />
22680C