DC motor - Siemens, s.r.o.

More documents

Recommendations

Info

Spare parts 7.4 Bearings D-end 7.4.1 Bearings Spare parts Figure 7-4 Bearings 1) Normal bearings; 2) Strengthened bearings Table 7-3 Spare parts list Spare part no. Designation 4.10 V-ring 4.20 Outer bearing cover 4.23 Outer bearing cover (with shortened spigot for floating bearings) 4.35 Grease slinger 4.40 Cylindrical-roller bearing (floating bearing) 4.41.1 Deep-groove ball bearing (floating bearing) 4.45 Compression spring 4.60 Inner bearing cover with felt rings 4.63 Inner bearing cover with felt rings (with shortened spigot for floating bearings) 4.80 Lubricating nipple Shaft height 225/250 and 280 mm with regreasing device [ID 547] SIEMENS AG T61160347010001 (DMHO V9) 7-4 Operating instructions 1GG6286-0NA4.-1VV1-Z
7.4.2 Installation instructions Spare parts Figure 7-5 Installation instructions for bearings (1) greased, (2) auxiliary installation disk, (3) grease-free Table 7-4 Spare parts list Spare part no. Designation 3.10 V-ring 4.10 V-ring 3.11 1) Rotary shaft seal 4.11 1) Rotary shaft seal 1) Only for special operating conditions [ID 548] Spare parts SIEMENS AG T61160347010001 (DMHO V9) Operating instructions 1GG6286-0NA4.-1VV1-Z 7-5
Page 1 and 2:
DC motor Operating Instructions Edi
Page 3 and 4:
Table of content Table of content 1
Page 5 and 6:
Table of content 9 Checklists, note
Page 7 and 8:
Safety information 1.1 Definitions,
Page 9 and 10:
1.2 Safety and application informat
Page 11 and 12:
Safety information SIEMENS AG T6116
Page 13:
Safety information SIEMENS AG T6116
Page 16 and 17:
Description, technical data, certif
Page 18 and 19:
Page 20 and 21:
Page 22 and 23:
Page 24 and 25:
Page 27 and 28:
Installation and Assembly 3.1 Trans
Page 29 and 30:
Storing indoors Installation and As
Page 31 and 32: Bearings Cooling Water drain holes
Page 33 and 34: 3.3 Aligning Instructions relevant
Page 35 and 36: Connecting cables Warning Establish
Page 37 and 38: Installation and Assembly •= the
Page 39 and 40: Installation and Assembly are trans
Page 41 and 42: exclusively! [ID 534] 3.5.8 Final c
Page 43 and 44: Commissioning 4.1 Safety informatio
Page 45 and 46: Commissioning •= the carbon brush
Page 47 and 48: Note 4.4 Energizing Commissioning A
Page 49: see also Commissioning •= the bea
Page 52 and 53: Operation 5.2 Energizing Overview V
Page 54 and 55: Operation 5.6 Faults Note When rest
Page 56 and 57: Operation ↓ Bearing squeaks ↓ B
Page 58 and 59: Operation Overview - faults with th
Page 60 and 61: Maintenance 6.1.2 Maintenance inter
Page 62 and 63: Maintenance Warning Especially when
Page 64 and 65: Maintenance •= Carefully remove t
Page 66 and 67: Maintenance Reworking the slots Sha
Page 68 and 69: Maintenance see also check, while t
Page 70 and 71: Maintenance Warning Before starting
Page 72 and 73: Maintenance Note Whenever you work
Page 74 and 75: Maintenance [ID 585] 6.3.6 Assembli
Page 76 and 77: Maintenance Figure 6-5 Mounting the
Page 79 and 80: Spare parts 7.1 Ordering spare part
Page 81: [ID 538] 7.3 Fan unit Spare parts F
Page 85 and 86: 7.5.2 Mounting the tacho-generator
Page 87: 7.7 Recommended spare parts Overvie
Page 91 and 92: Checklists, notes 9.1 Checklist for
Page 93 and 94: 9.3 Inspection checklist Inspection
Page 95 and 96: 9.4 Notes Checklists, notes SIEMENS
Page 97 and 98: Checklists, notes SIEMENS AG T61160
Page 99: Checklists, notes SIEMENS AG T61160
Page 102 and 103: SIEMENS AG Group: Automation and Dr
Page 105: 1 1a 1b 1c 1d 1e 1f 1g 1h 1i 1j 1k
show all

DC motor - Siemens, s.r.o.

Create successful ePaper yourself

Delete template?

Save as template?