DC motor - Siemens, s.r.o.

Spare parts
7.1 Ordering spare parts
Order details
The graphical representations in this section are schematic representations of the
basic versions. They serve the purpose of defining the spare parts. The design
actually delivered may differ in detail from these representations.
To order spare parts, please contact your sales partner in your region. You can
also use the helpline to the Siemens Service Center to locate the right place to
contact. Commercially available, standard components can be used, but ensure
that they have the same type of construction, dimensions, strength class etc..
When ordering spare parts, please specify the following:
1. Indication of the spare parts list, e.g. spare parts "stator and rotor"
2. Precise designation of the required spare part according to the spare parts list,
e.g. part: 8.00 – Rotor, complete
3. Motor type, machine-readable product code from rating plate:
1GG6286-0NA40-1VV1-Z
4. Serial number, 15-digit from rating plate:
N-T61160347010001
(3. and 4. are to be taken from the rating plate or from this machine
documentation)
Note
In some cases the spare parts service is compelled for organizational and
technical reasons to supply certain assemblies as complete functional units only.
Rolling-contact bearings and carbon brushes
When replacing rolling-contact bearings, in addition to the bearing identification
code, the replacement code for the bearing version is required. Both codes can be
found in the spare parts list or on the lubrication instruction plate.
The brush type and manufacturer are shown on the upper part of the brush on
carbon brushes.
[ID 536]
SIEMENS AG T61160347010001 (DMHO V9)
Operating instructions 1GG6286-0NA4.-1VV1-Z 7-1