DC motor - Siemens, s.r.o.
DC motor - Siemens, s.r.o.
DC motor - Siemens, s.r.o.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Operation<br />
5.6 Faults<br />
Note<br />
When restarting the <strong>motor</strong> after a long shutdown period, carry out the measures<br />
recommended in the section headed "Commissioning".<br />
[ID 562]<br />
5.6.1 Troubleshooting<br />
Consequential damage<br />
Note<br />
As well as eliminating the cause of the fault (in accordance with the fault table), it is<br />
also necessary to correct any damage that may have occurred to the <strong>motor</strong>.<br />
Instructions relevant for safety<br />
General<br />
Warning<br />
In the event of a fault the system must be shut down.<br />
Check isolation from the supply when carrying out repairs.<br />
Determination of causes and correction of faults must be carried out by responsible<br />
expert personnel.<br />
The fault tables in the following serve the purpose of fault finding and repair when<br />
faults occur as a result of electrical or mechanical influences. If necessary, consult<br />
the manufacturer.<br />
[ID 563]<br />
5.6.2 Faults in operation<br />
Overview<br />
Table 5-2 Faults in operation<br />
Fault characteristics<br />
Overview of faults in operation<br />
SIEMENS AG T61160347010001 (DMHO V9)<br />
5-4 Operating instructions 1GG6286-0NA4.-1VV1-Z
Change language