DC motor - Siemens, s.r.o.
DC motor - Siemens, s.r.o.
DC motor - Siemens, s.r.o.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Standards applied<br />
Description, technical data, certificates<br />
The data regarding the degree of protection, cooling and type of construction<br />
should be taken from the rating plate. The <strong>motor</strong>s are compliant with the following<br />
standards:<br />
Table 2-2 General standards<br />
Title DIN/EN IEC<br />
General Requirements for DIN EN 60034-1 IEC 60034-1<br />
Rotating Electrical Machines<br />
IEC 60085<br />
Terminal Markings and<br />
Direction of Rotation,<br />
Rotating Electrical Machines<br />
DIN EN 60034-8 IEC 60034-8<br />
[ID 508]<br />
2.5.2 Bearing design - deep-groove ball bearing<br />
Bearings<br />
A deep-groove ball bearing is fitted as a floating bearing at the drive end.<br />
Compression springs are fitted for axial preloading of the outer bearing rings.<br />
Typically, a deep-groove ball bearing is installed as a guide bearing (fixed bearing)<br />
at the non-drive end. The design of the bearing and the type of bearing used<br />
should be taken from the section headed "Spare parts".<br />
Note<br />
D-end ... drive end<br />
N-end ... non-drive end<br />
[ID 516]<br />
2.6 Technical Data<br />
2.6.1 Selected technical data<br />
Overview<br />
The selection of technical data shown below applies specifically to the 1GG6286-<br />
0NA40-1VV1-Z machine with the number N-T61160347010001.<br />
SIEMENS AG T61160347010001 (DMHO V9)<br />
Operating instructions 1GG6286-0NA4.-1VV1-Z 2-5