DC motor - Siemens, s.r.o.

Description, technical data, certificates
2.1 Applications
Applications, general
The motors of the 1G and 1H series are DC machines with a laminated stator
yoke, with open-circuit cooling and closed-circuit cooling respectively. They are
designed for the broadest possible range of applications in drive engineering and
energy conversion, and conform to the harmonized standards of the IE/EN 60034
series (VDE 0530). Use in potentially explosive atmospheres is prohibited.
Unless otherwise specified, the ratings apply to continuous operation duty, with a
coolant temperature of ≤ 40 °C and at a site altitude of up to 1000 m AMSL. It is
essential to take note of any divergent details on the rating plate. The operating
conditions must conform to all details on the rating plate.
Note
DC motors are components for installation in machines in keeping with the
machinery directive 89/392/EWG. Commissioning is forbidden until the conformity
of the end product with this directive has been established (observe EN 60204-1).
[ID 501]
2.2 Siemens Service Center
Contact for further information
Details about the design of the DC motor supplied and about the permissible
operating conditions are described in these Operating Instructions. If you have any
questions or suggestions, or if you require further information, please contact the
Siemens Service Center:
Industry help line (24-hour service): +49 (0)180 – 5050111
A&D Technical Support: +49 (0)180 – 5050222
E-mail: adsupport@siemens.com
[ID 518]
SIEMENS AG T61160347010001 (DMHO V9)
Operating instructions 1GG6286-0NA4.-1VV1-Z 2-1