micro automation
micro automation
micro automation
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Integration via communication with KNX/EIB<br />
<strong>micro</strong> <strong>automation</strong><br />
SET 28<br />
Building Automation
Data acquisition, transfer and logging with LOGO! and<br />
KNX/EIB building system technology<br />
Micro Automation Sets – ready-to<br />
run combinations from the Siemens<br />
<strong>automation</strong> environment.<br />
Quickly implemented <strong>automation</strong><br />
tasks at a favourable price in the<br />
world of <strong>micro</strong> <strong>automation</strong> – simple,<br />
low-cost and pre-tested in working<br />
applications.<br />
L1<br />
N<br />
LOGO! Power<br />
• KNX/EIB building system technology, Micro Automation via Ethernet (TCP/IP) and<br />
web-based visualization working together as one system<br />
• Completely networked – sensors for digital and analog data logging can be<br />
connected via LOGO! with GAMMA instabus components<br />
• LOGO! process data are available via GAMMA instabus in many systems<br />
(e.g. Ethernet, infrared, wireless, ISDN, PROFIBUS DP, USB, RS232)<br />
• Visualization, logging and archiving of LOGO! process data on PCs<br />
• GAMMA instabus components confi guration via Internet<br />
LOGO! monitoring and controlling GAMMA instabus Control room<br />
1 2<br />
8<br />
LOGO! logic module AM2 KNX/EIB<br />
Power<br />
distribution<br />
SITRANS Probe LU Door/window Wireless<br />
contacts connection<br />
9<br />
3<br />
10<br />
4<br />
Building<br />
installation bus<br />
11<br />
4<br />
5<br />
Bus connection<br />
6<br />
7<br />
USB IP<br />
interface<br />
Internet/<br />
Ethernet
1<br />
2<br />
3<br />
4<br />
5<br />
6<br />
7<br />
8<br />
9<br />
10<br />
11<br />
LOGO! Power (24 V/2.5 A), primary-switched power supply<br />
Power supply of logic and communication components<br />
LOGO! (12/24 RC), logic module<br />
Application area<br />
The Micro Automation Set is particularly suitable for geographically<br />
distributed buildings that have the need of centralized monitoring, e.g.:<br />
• Controlling of heating oil purchases<br />
• Measurement of rain water tank levels<br />
• Measurement of road salt or bulk good containers and tanks<br />
• Monitoring of chemicals in the water and waste water industries<br />
Recording, evaluation and processing of sensor signals, PI control, plain-text display<br />
of messages<br />
LOGO! (AM2), expansion module<br />
For logging of analog values<br />
LOGO!, CM KNX/EIB communication module<br />
For communication between LOGO! logic module and KNX/EIB devices<br />
Power supply, N 125/01, 160 mA<br />
For power supply of KNX/EIB<br />
USB interface N 148/11<br />
User interface for confi guration of KNX/EIB systems<br />
IP interface N 148/21<br />
Interface module between KNX/EIB and Ethernet<br />
SITRANS Probe LU<br />
Ultrasound sensor for level monitoring<br />
Door/window contacts GAMMA wave AP 260<br />
Radio transmitter with battery<br />
Connector wave/instabus UP 140<br />
Connects radio products with GAMMA instabus<br />
Bus connection UP 114<br />
Connects bus end devices with GAMMA instabus<br />
Support for configuring is available on the Internet: for example simple start-up software<br />
examples and detailed Micro Application Examples with programs and parameters.<br />
Visit: www.siemens.com/<strong>micro</strong>set
1<br />
2<br />
3<br />
4<br />
5<br />
6<br />
7<br />
8<br />
9<br />
10<br />
11<br />
MICRO AUTOMATION SET – your planning tool<br />
Choose from implementation plans that have proven success. You will fi nd all the necessary<br />
components for the application (Micro Automation Set) in this overview, and also on the Internet.<br />
In cases where you require versions that are adapted to your particular system requirements, obtain<br />
the appropriate ordering data for specifi c component versions under www.siemens.com/<strong>micro</strong>set.<br />
Your MICRO AUTOMATION SET – everything that you need<br />
Product Order No.<br />
LOGO! Power (24 V/2.5 A), primary-switched power supply<br />
LOGO! (12/24 RC), logic module<br />
LOGO! (AM2), expansion module 6ED1 055-1MA00-0BA0<br />
LOGO! CM KNX/EIB communication module 6BK1 700-0BA00-0AA1<br />
Power supply, N 125/01, 160 mA<br />
USB interface N 148/11<br />
IP interface N 148 / 21 5WG1 148-1AB21<br />
SITRANS Probe LU, Ultrasound sensor 7ML5 221-1AA11<br />
Door/window contacts GAMMA wave AP 260, Radio transmitter with battery 5WG3 260-3AB11<br />
Connector wave/instabus UP 140 5WG3 140-2HB11<br />
Bus connection UP 114 5WG1 114-2AB02<br />
Confi guration sofware / tools Order No.<br />
USB cable (Type A – Type B) available from specialist dealers<br />
LOGO! Soft Comfort 6ED1 058-0BA01-0YA0<br />
ETS3 Professional Version 3.0d http://www.konnex.org/knx-tools<br />
IPAS ComBridge Studio Suite/Core and Webtab Services http://www.ipas-products.com<br />
Your contact for the MICRO AUTOMATION SET<br />
You already have a personal local Siemens contact?<br />
He/she will also help you with your questions about the MICRO<br />
AUTOMATION SET.<br />
You do not have a personal local Siemens contact yet?<br />
Please call the adjoining helpline number to get your regional<br />
contact.<br />
Technical information about each product is available from our<br />
technical support.<br />
Your MICRO AUTOMATION SET on the Internet<br />
You can fi nd contacts, all ordering information indicated in this<br />
document as well as ordering information for variants, more<br />
information and examples at:<br />
SIMATIC is a registered trademark of Siemens. Other designations used in this document may<br />
be trademarks whose use by third parties for their own purposes could violate the rights of the<br />
owners.<br />
The information provided in this brochure contains merely general descriptions or characteristics of<br />
performance which in case of actual use do not always apply as described or which may change as<br />
a result of further development of the products.<br />
An obligation to provide the respective characteristics shall only exist if expressly agreed in the<br />
terms of contract.<br />
Siemens AG<br />
Automation and Drives<br />
A&D CC MA<br />
P.O. Box 48 48<br />
90327 NUREMBERG, GERMANY<br />
www.siemens.com/<strong>micro</strong>set<br />
6EP1 3 3 2-1SH42<br />
6ED1 052- 1 MD00-0BA5<br />
5WG1 125-1AB01<br />
5WG1 148-1AB11<br />
Helpline: +49 180 5050 111<br />
www.siemens.com/<strong>micro</strong>set<br />
<strong>micro</strong><strong>automation</strong>.aud@siemens.com<br />
Recommended by<br />
Comments/Versions<br />
PUBLICIS<br />
Subject to change without prior notice 05/07 | Order No. E20001-A1660-P273-X-7600 | DISPO 06307 | 2100/2076 MK.AS.MS.XXXX.52.7.12 WS 0507X.0. | Printed in Germany | © Siemens AG 2007