Convenient Operations and Setups - Sharp & Casio Cash Registers

PLU feature programming
There are two different methods you can use to assign features to PLUs.
With “Batch feature programming”, you can use a single operation to assign multiple features.
“Individual feature programming”, on the other hand, let you assign features one-by-one.
This method is recommended for programming of special features to individual PLUs.
Batch feature programming
When using this procedure to assign multiple features to PLUs, use 9-digit codes that you create using the
following procedure. To a new (not sequential) PLU
PGM
Mode Switch
Negative PLU
Hash PLU
Single item sale
Treat as subdepartment/PLU.
6 3s 6 * 6
High digit limit specification (for subdepartment)
Taxable status 1 (for the U.S. model)
Taxable status 2 (for the U.S. model)
Taxable status 3 (for the U.S. model)
PLU No.
(1 ~ 1600; U. S.)
(1 ~ 800; Canada)
Taxable status (for the Canadian model)
Non tax = 0, Taxable 1 = 1, Taxable 2 = 2, Taxable 3 = 3, Taxable 4 = 4,
Taxable 1 & 2 = 5, Taxable 1 & 3 = 6, Taxable 1 & 4 = 7
Always “0”
Department link (00 ~ 96; U.S., 00 ~ 24; Canada)
Always “00”
Different program to the next PLU
6 ::::;::;; 6 a 6 s
D 9 D 8 D 7 D 6 D 5 D 4 D 3 D 2 D 1
a
b
a
b
a
b
c
No = 0
Yes = 2
No = 0
Yes = 4
No = 0
Yes = 1
PLU = 0
Subdept. = 4
Significant
number
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
Significant
number
Significant
numbers
a+b = : D9
a+b = : D8
: D7
a+b+c = : D6
: D6
; D5
:: D4 D 3
;; D2 D 1
59
www.cashregisters.net
Convenient Operations and Setups
E