18.08.2013 Views

upgrading and repairing PCs technicians ... - 400 Bad Request

upgrading and repairing PCs technicians ... - 400 Bad Request

upgrading and repairing PCs technicians ... - 400 Bad Request

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

290<br />

Chapter 11—Networking<br />

Table 11.18 Troubleshooting TCP/IP Connections Continued<br />

Problem Symptoms Solution<br />

One user to an IP Can’t share the Web. If you’re trying to share your<br />

address. Internet connection, use software<br />

such as Artisoft’s Ishare or check<br />

with your networking hardware<br />

vendor for their recommendations.<br />

If your LAN uses a proxy server for<br />

connection, some sharing products<br />

might not work.<br />

Windows 98 Second Edition, Windows<br />

2000 Professional, <strong>and</strong> Windows Me<br />

can all be configured as a gateway to<br />

enable Internet sharing from a cable<br />

modem, dial-up modem, ISDN, or<br />

DSL modem connection. For details,<br />

see Chapter 6, “Serial Ports <strong>and</strong><br />

Modems.”<br />

Browser can’t To verify that the TCP/IP connecdisplay<br />

Web pages. tion works, open an MS-DOS window<br />

<strong>and</strong> type PING websitename<br />

(replace websitename with a particular<br />

IP address or Web site). If<br />

PING indicates that signals are<br />

returning, check the proxy settings<br />

in the browser. If PING can’t connect,<br />

recheck your TCP/IP settings<br />

for the NIC or modem <strong>and</strong> retry<br />

after making changes.<br />

Direct Cable Connections<br />

Null Modem <strong>and</strong> Parallel Data-Transfer Cables<br />

A null modem cable is a special cable that has its circuits crossed so<br />

the transmit data (TD) pin on each serial port connector leads to<br />

the receive data (RD) pin on the other. A cable that connects the<br />

systems’ parallel ports in this way is called a parallel data-transfer<br />

cable. Cables such as these are usually available at computer stores<br />

that sell cables. They are sometimes called LapLink cables, after one<br />

of the first software products to introduce the concept of the direct<br />

cable connection. The cables supplied with FastLynx <strong>and</strong> other<br />

data-transfer programs for MS-DOS <strong>and</strong> Windows 3.x/9x/Me will<br />

also work. A good rule of thumb is this: If the cable works for<br />

LapLink or the MS-DOS INTERLNK file transfer utility, you can use<br />

it for Direct Cable Connection, as well.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!