upgrading and repairing PCs technicians ... - 400 Bad Request
upgrading and repairing PCs technicians ... - 400 Bad Request
upgrading and repairing PCs technicians ... - 400 Bad Request
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
266<br />
Chapter 10—Video <strong>and</strong> Audio<br />
Table 10.28 Resolving Sound Card Resource Conflicts Continued<br />
Problem Symptom How to Detect Solution<br />
PCI-slot sound Windows software Check for Legacy If no Legacy support<br />
card works okay plays; DOS software or SB settings in the is installed, install it.<br />
with Windows, but doesn’t play card; Windows 9x Device Follow instructions<br />
not MS-DOS apps. can’t detect card. Manager. carefully for using the<br />
card with older software.<br />
You might need<br />
to run Setup program<br />
or TSR before starting<br />
DOS program. You<br />
might need software<br />
patch from game<br />
developer. In extreme<br />
cases, you might<br />
need to use an actual<br />
SB Pro/16 card alongside<br />
your PCI sound<br />
card <strong>and</strong> use it<br />
instead.<br />
Some DOS <strong>and</strong> Error messages Check card or Legacy Software expects SB<br />
Windows software about incorrect software settings; default settings; use<br />
works, but some card settings. alternative settings settings in preceding<br />
can’t use card. work okay for some table for Sound<br />
programs, but not Blaster 16 (all but<br />
others. DMA 5 apply to<br />
SB Pro).<br />
DSP-equipped Multifunction Check Windows 9x Mwave <strong>and</strong> similar<br />
card, such as IBM sound <strong>and</strong> modem Device Manager for cards require basic<br />
Mwave, not card doesn’t work. DSP host configuration. SB settings as in<br />
installed properly previous entry, plus<br />
or out of serial (COM) port<br />
resources. setting resources for<br />
the DSP! Reinstall<br />
card with all drivers.<br />
PnP card on a PnP enumerator Check CONFIG.SYS Reinstall software<br />
non-PnP system program in startup or AUTOEXEC.BAT <strong>and</strong> test; upgrade<br />
was working, but process probably for driver; use REM to BIOS to PnP mode if<br />
has now stopped removed or create labels before <strong>and</strong> possible.<br />
in these files. damaged. after driver comm<strong>and</strong>s.<br />
Most Common Causes of Hardware Conflicts with<br />
Sound Card<br />
The most common causes of system resource conflicts are the following:<br />
• SCSI host adapters<br />
• Network interface cards