vSphere Storage - ESXi 5.1 - Documentation - VMware

vSphere Storage
You have created the virtual VMkernel adapter for the physical FCoE network adapter installed on your host.
NOTE To avoid FCoE traffic disruptions, do not remove the FCoE network adapter (vmnic#) from the vSphere
standard switch after you set up FCoE networking.
Add Software FCoE Adapters
You must activate software FCoE adapters so that your host can use them to access Fibre Channel storage.
The number of software FCoE adapters you can activate corresponds to the number of physical FCoE NIC
ports on your host. ESXi supports the maximum of four software FCoE adapters on one host.
Prerequisites
Set up networking for the software FCoE adapter.
Required privilege: Host.Configuration.Storage Partition Configuration
Procedure
1 Log in to the vSphere Client, and select a host from the inventory panel.
2 Click the Configuration tab and click Storage Adapters in the Hardware panel.
3 Click Add, select Software FCoE Adapter, and click OK.
4 On the Add Software FCoE Adapter dialog box, select an appropriate vmnic from the drop-down list of
physical network adapters.
Only those adapters that are not yet used for FCoE traffic are listed.
5 Click OK.
The software FCoE adapter appears on the list of storage adapters.
After you activate the software FCoE adapter, you can view its properties. If you do not use the adapter, you
can remove it from the list of adapters.
Add Software FCoE Adapters in the vSphere Web Client
You must activate software FCoE adapters so that your host can use them to access Fibre Channel storage.
The number of software FCoE adapters you can activate corresponds to the number of physical FCoE NIC
ports on your host. ESXi supports the maximum of four software FCoE adapters on one host.
Prerequisites
Set up networking for the software FCoE adapter.
Procedure
1 Browse to the host in the vSphere Web Client navigator.
2 Click the Manage tab, and click Storage.
3 Click Storage Adapters, and click Add.
4 Select Software FCoE Adapter.
5 On the Add Software FCoE Adapter dialog box, select an appropriate vmnic from the drop-down list of
physical network adapters.
Only those adapters that are not yet used for FCoE traffic are listed.
48 VMware, Inc.