vSphere Storage - ESXi 5.1 - Documentation - VMware
vSphere Storage - ESXi 5.1 - Documentation - VMware
vSphere Storage - ESXi 5.1 - Documentation - VMware
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
3 Click VM Options.<br />
4 Click the Fibre Channel NPIV triangle to expand the NPIV options.<br />
5 Deselect the Temporarily Disable NPIV for this virtual machine check box.<br />
6 Select Generate new WWNs.<br />
7 Specify the number of WWNNs and WWPNs.<br />
A minimum of 2 WWPNs are needed to support failover with NPIV. Typically only 1 WWNN is created<br />
for each virtual machine.<br />
The host creates WWN assignments for the virtual machine.<br />
What to do next<br />
Register newly created WWNs in the fabric so that the virtual machine is able to log in to the switch, and assign<br />
storage LUNs to the WWNs.<br />
Assign WWNs to Virtual Machines<br />
You can assign a WWN to a new virtual machine with an RDM disk when you create this virtual machine.<br />
You can create from 1 to 16 WWN pairs, which can be mapped to the first 1 to 16 physical HBAs on the host.<br />
Procedure<br />
1 Open the New Virtual Machine wizard.<br />
2 Select Custom, and click Next.<br />
3 Follow all steps required to create a custom virtual machine.<br />
4 On the Select a Disk page, select Raw Device Mapping, and click Next.<br />
5 From a list of SAN disks or LUNs, select a raw LUN you want your virtual machine to access directly.<br />
6 Select a datastore for the RDM mapping file.<br />
You can place the RDM file on the same datastore where your virtual machine files reside, or select a<br />
different datastore.<br />
NOTE If you want to use vMotion for a virtual machine with enabled NPIV, make sure that the RDM file<br />
is located on the same datastore where the virtual machine configuration file resides.<br />
7 Follow the steps required to create a virtual machine with the RDM.<br />
8 On the Ready to Complete page, select the Edit the virtual machine settings before completion check<br />
box and click Continue.<br />
The Virtual Machine Properties dialog box opens.<br />
9 Assign WWNs to the virtual machine.<br />
a Click the Options tab, and select Fibre Channel NPIV.<br />
b Select Generate new WWNs.<br />
c Specify the number of WWNNs and WWPNs.<br />
A minimum of 2 WWPNs are needed to support failover with NPIV. Typically only 1 WWNN is<br />
created for each virtual machine.<br />
10 Click Finish.<br />
The host creates WWN assignments for the virtual machine.<br />
Chapter 4 Configuring Fibre Channel <strong>Storage</strong><br />
<strong>VMware</strong>, Inc. 43