vSphere Storage - ESXi 5.1 - Documentation - VMware
vSphere Storage - ESXi 5.1 - Documentation - VMware
vSphere Storage - ESXi 5.1 - Documentation - VMware
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
3 From the list of available targets, select a target to configure and click Authentication.<br />
4 Deselect Inherit settings from parent and specify authentication method.<br />
n None<br />
n Use unidirectional CHAP if required by target<br />
n Use unidirectional CHAP unless prohibited by target<br />
n Use unidirectional CHAP<br />
n Use bidirectional CHAP. To configure bidirectional CHAP, you must select this option.<br />
5 Specify the outgoing CHAP name.<br />
Make sure that the name you specify matches the name configured on the storage side.<br />
n To set the CHAP name to the iSCSI adapter name, select Use initiator name.<br />
n To set the CHAP name to anything other than the iSCSI initiator name, deselect Use initiator name<br />
and type a name in the Name text box.<br />
6 Enter an outgoing CHAP secret to be used as part of authentication. Use the same secret that you enter<br />
on the storage side.<br />
7 If configuring bi-directional CHAP, specify incoming CHAP credentials.<br />
Make sure to use different secrets for the outgoing and incoming CHAP.<br />
8 Click OK.<br />
9 Rescan the iSCSI adapter.<br />
If you change the CHAP parameters, they are used for new iSCSI sessions. For existing sessions, new settings<br />
are not used until you log out and login again.<br />
Disable CHAP<br />
You can disable CHAP if your storage system does not require it.<br />
If you disable CHAP on a system that requires CHAP authentication, existing iSCSI sessions remain active<br />
until you reboot your host, end the session through the command line, or the storage system forces a logout.<br />
After the session ends, you can no longer connect to targets that require CHAP.<br />
Required privilege: Host.Configuration.<strong>Storage</strong> Partition Configuration<br />
Procedure<br />
1 Open the CHAP Credentials dialog box.<br />
2 For software and dependent hardware iSCSI adapters, to disable just the mutual CHAP and leave the oneway<br />
CHAP, select Do not use CHAP in the Mutual CHAP area.<br />
3 To disable one-way CHAP, select Do not use CHAP in the CHAP area.<br />
The mutual CHAP, if set up, automatically turns to Do not use CHAP when you disable the one-way<br />
CHAP.<br />
4 Click OK.<br />
Chapter 11 Configuring iSCSI Adapters and <strong>Storage</strong><br />
<strong>VMware</strong>, Inc. 107