(SYSLIB) Programming Reference Manual - Public Support Login ...

Table 17–3. SAR$: READ Procedure CALL_STATUS Codes
Octal Code Status
025 An invalid character set type was read.
SAR$ READ
026 The READ packet is not initialized; a call to SAR_OPEN_INPUT must be made
before calls to SAR_READ or SAR_CLOSE_INPUT.
027 An incorrect ACD subroutine version is being used with SAR$.
030 The file name buffer address in the FIP is NULL; an address of an SDF file
name must be specified.
031 The file name buffer address in the FIP is NULL; an address of a symbiont file
name must be specified.
032 An illegal value is specified for the file name buffer byte length; legal values
are from 1 to 12.
033 The input I/O buffer address is NULL; this buffer must be provided when
reading to an SDF file or element.
034 The SDF data record or control record read exceeds the maximum allowed
length of an SDF record.
0100 An unrecognized error has occurred in the SDFI routine. The SDFI error code
is returned in the SUB_STATUS field.
0101 An unrecognized error has occurred in an ACD subroutine. The ACD error
code is returned in the SUB_STATUS field.
0102 An unrecognized error has occurred in executing ER SYMB$. The SYMB$
error code is returned in the SUB_STATUS field.
0103 An incorrect SDFI packet version is being used. The correct SDFI packet
version is returned in the SUB_STATUS field.
0104 An incorrect ER SYMB$ packet version is being used. The correct SYMB$
packet version is returned in the SUB_STATUS field.
A CALL_STATUS code of 0100 or greater is a SAR$ internal error.
The READ procedure I/O status codes listed in Table 17–4 may be returned to the caller
in the IO_STATUS field of the READ packet.
Table 17–4. SAR$: READ Procedure IO_STATUS Status List
Octal Code Status
0 Normal I/O status.
01 to 40 See Table C–2, I/O Status Codes, ER Programming Reference Manual for
an explanation of the I/O status codes.
7833 1733–004 17–19