3667 Cutting Layouts Sewing Directions - PrintSew
3667 Cutting Layouts Sewing Directions - PrintSew
3667 Cutting Layouts Sewing Directions - PrintSew
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
English<br />
<strong>3667</strong><br />
4<br />
1<br />
2<br />
6<br />
3 / 4<br />
3<br />
© Copyright 2007—Simplicity Pattern Co., Inc. / Printed in U.S.A. / Simplicity is a registered trademark of Simplicity Pattern Co., Inc.<br />
5<br />
C “SUPER POOCH”<br />
1. Fold each Cuff in half, lengthwise with the WRONG sides<br />
together. Sew a Cuff onto the bottom edge of each Sleeve<br />
stretching cuff to fit. Press seam toward cuff.<br />
2. With the RIGHT sides of the fabric together:<br />
a-Match the dots on the top of the Front Sleeves to the dots<br />
on the Coat/Front Sleeve Openings and pin together.<br />
b-Sew the Front Sleeves into the Front Sleeve Openings.<br />
3. With the RIGHT sides of the fabric together:<br />
a-Sew the Front Sleeve seam together.<br />
b-Trim/cut a triangular wedge from the cuff edge of the<br />
seams.<br />
4. With the RIGHT sides of the fabric together:<br />
Sew the center front (Chest) Seam together.<br />
5. Hem outer edges of Cape 1/2" (1.3cm).<br />
a-With the WRONG side of Cape to the RIGHT side of<br />
coat:<br />
b-Match the Cape to Coat at Neck Edge.<br />
c-Match the Centers Back and the small dots.<br />
d-Sew the Upper Cape Edge to the Neck Opening.<br />
6. With the RIGHT sides of the fabric together:<br />
a-Sew the center front seam of the Collar together.<br />
b-With the WRONG sides of the fabric together fold the<br />
Collar down onto itself to form a circle.<br />
1<br />
9<br />
2<br />
8<br />
7<br />
7. With the RIGHT sides of the fabric together:<br />
a-Slip the Collar over the Neck Opening.<br />
b-Match the Chest Seam and the Collar Seam and pin<br />
together.<br />
c-Match the Collar Edges and the notches.<br />
d-Sew the Collar Edges to the Neck Opening, stretching<br />
the collar to fit. Press seam up.<br />
8. Hem Belly Opening 1/2” (1.3cm).<br />
9. Cut a 3-1/2" (9cm) Circle out of one color of felt. Cut a slightly<br />
smaller Circle out of the second color of felt. Glue the felt<br />
circles together.<br />
Hand-sew or glue the Applique to the felt circles and then on<br />
the OUTSIDE, hand-sew the entire applique to the Cape<br />
centered over the large dot.<br />
D “LA MUTT-A-SAURUS REX”<br />
1. With the RIGHT sides of the fabric together:<br />
a-Match the dots on the Spikes to the dots on the Upper<br />
Edge of the Coat and pin together.<br />
b-Sew the Spikes onto the Coat.<br />
2. With the RIGHT sides of the fabric together:<br />
Sew the Center Back Seam of the Coat from the Neck<br />
Edge to the small dot, being careful not to catch in Spikes.