PEC12-25 CAPEC-PROCESS Industrial Consortium ... - DTU Orbit

PROCESS
PEC11-06
PEC11-52
PEC11-55
PEC11-57
PEC12-01
PEC12-02
PEC12-06
PEC12-07
PEC12-08
PEC12-09
PEC12-10
PEC12-11
Gernaey K.V., Cervera-Padrell A.E. and Woodley J.M. (2012) A perspective on Process
Systems Engineering in pharmaceutical process development and innovation. Computers
and Chemical Engineering, 42, 15-29.
C - In press/Submitted Manuscripts
Jakob Kjøbsted Huusom, Niels Kjølstad Poulsen, Sten Bay Jørgensen, John Bagterp
Jørgensen, 2011, ”Offset-Free Model Predictive Control Based on ARX Models”, Journal
of Process Control, Submitted
Nor Alafiza Yunus, Krist V Gernaey, John M Woodley & Rafiqul Gani, 2012,
“Computer-aided approach for design of tailor-made blended products”, reviewed
conference proceedings to 3rd International Gas processing Symposium, In Press
Tiina M. Komulainen, Rasmus Enemark-Rasmussen, Gürkan Sin, John P. Fletcher, David
Cameron, 2011, “Experiences on dynamic simulation software in chemical engineering
education”, Education for Chemical Engineers journal, Submitted
Alberto Quaglia, Bent Sarup, Gürkan Sin, Rafiqul Gani, 2012, “Synthesis and Design of
Processing Networks: Stochastic Formulation and Solution”, Computer-Aided Chemical
Engineering Series, Volume 30, (ESCAPE22), Accepted, In Press
Mauricio-Iglesias, M. Johansen, K. Jørgensen, S.B. Sin, G., 2012, ”A framework for
systematic review, analysis and improvement of operation and control systems in process
industries”, Industrial and Engineering Chemistry Research, Submitted
Mauricio-Iglesias, M., Jørgensen, S.B. Sin, G., 2012, ”A systematic methodology for
controller tuning in wastewater treatment plants”, Proceedings of The International
Symposium on Advanced Control of Chemical Processes (AdChem 12), Accepted
Nor Alafiza Yunus, Krist V. Gernaey, John M. Woodley and Rafiqul Gani, 2012, “An
Integrated Methodology for Design of Tailor-Made Blended Products”, Computer-Aided
Chemical Engineering Series, Volume 30, (ESCAPE22), Accepted, In Press
Noor Asma Fazli Abdul Samad, Kresten Troelstrup Meisler, Gürkan Sin, Krist V.
Gernaey, Rafiqul Gani, 2012, “A Generic Framework for Systematic Design of Process
Monitoring and Control System for Crystallization Processes”, Computer-Aided
Chemical Engineering Series, Volume 30, (ESCAPE22), Accepted, In Press
Igor Mitrofanov, Sascha Sansonetti, Jens Abildskov, Gürkan Sin and Rafiqul Gani, 2012,
“The Solvent Selection framework: solvents for organic synthesis, separation processes
and ionic-liquids solvents”, Computer-Aided Chemical Engineering Series, Volume 30,
(ESCAPE22), Accepted, In Press
Amol Hukkerikar, Mark Jones, Bent Sarup, Jens Abildskov, Gürkan Sin, and Rafiqul
Gani, 2012, ”Sensitivity of Process Design due to Uncertainties in Property Estimates”,
(PSE-2012 proceedings), Computer-Aided Chemical Engineering, Accepted (In Press)
Rasmus Enemark-Rasmussen, David Cameron, Per Bagge Angelo and Gürkan Sin, 2012,
“A simulation based engineering method to support HAZOP studies”, (PSE-2012
proceedings), Computer-Aided Chemical Engineering, Accepted (In Press)
Lida Simasatitkul, Amornchai Arpornwichanop, Rafiqul Gani, 2012, “Design
methodology for bio-based processing: Biodiesel and fatty alcohol production”, (PSE-
2012 proceedings), Computer-Aided Chemical Engineering, Accepted (In Press)
76