PEC12-25 CAPEC-PROCESS Industrial Consortium ... - DTU Orbit

PEC10-27
PEC10-29
PEC10-30
PEC10-31
PEC10-32
PEC10-33
PEC10-34
PEC10-38
PEC10-41
PEC10-42
PEC10-43
PEC10-46
PEC10-47
Martin D. Ellegaard, Jens Abildskov, John P. O’Connell, 2011, “Solubilities of gases in
ionic liquids using a corresponding-states approach to Kirkwood-Buff solution theory”,
Fluid Phase Equilibria, Special Issue PPEPPD 2010, 302, pp. 93-102
Corominas L., Sin G., Puig S., Balaguer M.D., Vanrolleghem P.A., Colprim J., 2011,
“Modified calibration protocol evaluated in a model-based testing of SBR flexibility”,
Bioprocess and Biosystems Engineering, 34(2), pp. 205-214
Rasmus Wedberg, John P. O’Connell, Günther H. Peters, Jens Abildskov, 2011, “Total
and Direct Correlation Function Integrals from Molecular Simulation of Binary Systems”,
Fluid Phase Equilibria, 302(1-2), pp. 32-42
Prado-Rubio, O.A.; Jørgensen, S.B. and Jonsson, G., 2011, “Model based investigation of
the potential lactate recovery using Electro-Enhanced Dialysis-Static analysis”,
Separation and Purification Technology Journal, 78, pp. 113-124
Prado-Rubio, O.A.; Jørgensen, S.B. and Jonsson, G., 2011, “Reverse Electro-Enhanced
Dialysis for lactate recovery from a fermentation broth”, Journal of Membrane Science,
374(1-2), pp. 20–32
Ricardo Morales-Rodriguez, Anne S. Meyer, Krist V. Gernaey, Gürkan Sin, 2011,
”Dynamic Model-Based Evaluation of Process Configurations for Integrated Operation of
Hydrolysis and Co-Fermentation for Bioethanol Production from Lignocellulose”,
Bioresource Technology Journal, 102(2), pp. 1174-1184
Conte E., Gani R. and Ng K. M., 2011, “Design of formulated products: a systematic
methodology”, AIChE Journal, 57(9), pp. 2431-2449
Noor Asma Fazli Abdul Samad, Ravendra Singh, Gürkan Sin, Krist V. Gernaey, Rafiqul
Gani, 2011, ”A generic multi-dimensional model-based system for batch cooling
crystallization processes”, Computers & Chemical Engineering, 35(5), pp. 828-843
Heitzig, Martina; Sin, Gurkan; Sales Cruz, Mauricio; Glarborg, Peter; Gani, Rafiqul,
2011, ”A computer-aided modeling framework for efficient model development, analysis
and identification: Combustion and reactor modeling”, Industrial & Engineering
Chemistry Research Puigjaner Special Issue, 50(9), pp. 5253–5265
Philip Lutze, Alicia Román-Martinez, John M. Woodley, Rafiqul Gani, 2012, “A
systematic synthesis and design methodology to achieve process intensification in (bio)
chemical processes”, Computers & Chemical Engineering, 36, pp. 189-207
E. Conte, R. Gani, Y. S. Cheng, K. M. Ng, 2012, “Design of Formulated Products:
Experimental Component“, AIChE Journal, 58(1), pp. 173-189
M. V. Ruano, J. Ribes, J. Ferrer and G. Sin, 2011, “Application of the Morris method for
screening the influential parameters of fuzzy controllers applied to wastewater treatment
plants”, Water Science & Technology, Vol. 63(10), pp. 2199–2206
Iskandar Halim, Ana Carvalho, Rajagopalan Srinivasan, Henrique Matos, Rafiqul Gani,
2011, “A Combined Heuristic and Indicator-based Methodology for Design of
Sustainable Chemical Process Plants”, Computers and Chemical Engineering Journal
(Special Issue: Energy & Sustainability), 35(8), pp. 1343-1358
71