You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
for gatekeeper 1. gk2 for gatekeeper 2. gk for all the gatekeepers<br />
available ( search sequence: gk1 > gk2 > gk3 > gk4). Gk3_2_1 will try<br />
gk3 first, then gk2, then gk1.<br />
All the setting above can be added by port number, for examples:<br />
168.56.9.22:8495 will call to 8495 port.<br />
srn, rsn: same as gkn , basically, it is used for <strong>SIP</strong> register<br />
server.<br />
PSTN: route this call via PSTN line interface. This is usually used<br />
for the backup route for the rule setting on /Routing setup /<strong>VoIP</strong><br />
Call out/ with “v” prefix.<br />
ipivr: Enter the Network parameter voice interactive setting<br />
mode. User can use this function to enter all the WAN network<br />
parameters without PC. ( Please refer the application note “ IP<br />
IVR produce “ for more detail procedure ).<br />
ldcfg: Restore all parameters to the default values. User can<br />
assign a password to use this function to restore all the<br />
parameters to the default values.<br />
rect: Enter to voice record procedure . User can assign a function<br />
code for enter the voice record procedure, when press this code<br />
to enter the voice record procedure, the device will record 30<br />
seconds voice file and keep on sound wave file ( G.711, uLaw),<br />
User can download the recorded wave file on /<strong>VoIP</strong><br />
Setup/Advance setting/Prompt Voice/ and used this file to<br />
upload for customization voice file or used for busy tone analysis.<br />
agent: agent code setting. When a <strong>VoIP</strong> call in made by this<br />
device, it will ring the assigned phone set. If the user want to use<br />
the different phone set (connected to same device, but did not<br />
ring) to answer the call, just off hook and enter this agent code to<br />
redirect the call to this phone you used for talk.<br />
lo: assign the route to local loop back. The destination IP of this<br />
call will be the local host, i.e.:127.0.0.1<br />
f. Strip: the number of digits will be ignored by user input. For example, if<br />
30
Change language