Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
4.2.2.3 Line configure/ Tone Setting<br />
/<strong>VoIP</strong> Setup/Line Configure/ Tone Setting<br />
A.Call Progress Tone<br />
This page defines the tones generated to the phone connected to the phone port.<br />
The cadence of CPT is been defined here also. All lines use same tone<br />
parameters. After modify the tone parameters, you must 22save modify then<br />
22Reboot to let the modified parameters work.<br />
Detect Voice Busy Cycle: Use the parameters to automatic detect cadence<br />
busy tone. When detected a voice cadence repeat over the number setting<br />
in sequence, the <strong>VoIP</strong> <strong>Gateway</strong> will treat it like busy tone and disconnect<br />
automatically. Please do not set this parameter less than 5 to avoid<br />
unexpected erroneous disconnect.<br />
B.Tone define Table<br />
You can set up to 15 tones set for generation. For the generation, the first entry<br />
will be used. The call progress tones, ranging from 300 Hz to 2000 Hz. Tone:<br />
Maximum 15 tones can be defined.<br />
a. Type:<br />
Dial: Define the generated dial tone.<br />
21
Change language