FCS-0031 User Manual V1 0 - LevelOne - Quality networking ...

More documents

Recommendations

Info

Camera Setting Brightness - Drag the slider bar to adjust the image brightness level, which ranges from -5 to +5. Contrast - Drag the slider bar to adjust the image contrast level, which ranges from -5 to +5. Sharpness - Drag the slider bar to adjust the image sharpness level, which ranges from -5 to +5. Saturation - Drag the slider bar to adjust the image saturation level, which ranges from -5 to +5. Environment - <strong>User</strong> can look for a place that best suits your needs, either outdoor or indoor. Flicker-Free - While flicker-free technology eliminates the problem of flicker, it can cause slight judder on fast moving images or blurring problems; fast scrolling text for example may blur. NOTE - The "Environment" setting adjusts the sampling rate of the camera sensor to achieve Flicker-free effect on the video. The sampling rate, however, may not work best with the frame rate chosen in the "Video" setting. For best recording experience, configure your IP camera to one of the following frame rates based on the Environment used: Environment / Flicker-Free Frame Rate ------------------------------------ ---------------------------------- Outdoor or Indoor ( 50Hz ) 25, 10, 7, 5, 3, 2 Indoor ( 60 Hz ) 20, 10, 7, 5, 3, 2 Mirror and Flip Mirror - Enable to horizontally reflect the display of the live video. - 21 -
Flip - Enable to vertically reflect the display of the live video. . Video You can set up two separate streams for the Network Camera for different viewing devices. Stream 1 & Stream 2 Video Codec - The Network Camera offers three choices of video codec standards for real-time viewing: H.264, MPEG-4 and MJPEG. Video Resolution - Select from the drop down list to choose the best resolution that fit your need. Frame Rate - Select from the drop down list of the frame rate, which ranges from 2 to 30 fps when H.264 or MJPEG is selected. Only 3 to 15 fps can be chosen when MPEG-4 is - 22 -
Page 1 and 2: LevelOne User Manual FCS-0031 Megap
Page 3 and 4: Table of Contents Before You Use Th
Page 5 and 6: Before You Use This Product The use
Page 7 and 8: - 2 -
Page 9 and 10: The reset button is used to reset t
Page 11 and 12: Camera Connection Basic Connection
Page 13 and 14: - 8 -
Page 15 and 16: 2. Do not check the box if user wou
Page 17 and 18: 4. Setting the Network Camera IP ad
Page 19 and 20: Access to the Network Camera Check
Page 21 and 22: Installing plug-in For the initial
Page 23 and 24: TCP - This protocol guarantees the
Page 25: Configuration Click Configuration o
Page 29 and 30: RTSP Server To utilize RTSP authent
Page 31 and 32: Multicast Multicast addressing is a
Page 33 and 34: DHCP - Get IP address automatically
Page 35 and 36: TZO TZO - TZO is one kind of the DD
Page 37 and 38: Detection Setting - Select and enab
Page 39 and 40: Email Password - Enter the password
Page 41 and 42: Scheduled Event Click New to open t
Page 43 and 44: System System Log Log - To send a s
Page 45 and 46: Device Information Video/Audio Sett
Page 47 and 48: Maintenance User Management This se
Page 49 and 50: Configuration This feature allows y

FCS-0031 User Manual V1 0 - LevelOne - Quality networking ...

Create successful ePaper yourself

Delete template?

Save as template?