FCS-0031 User Manual V1 0 - LevelOne - Quality networking ...
FCS-0031 User Manual V1 0 - LevelOne - Quality networking ... FCS-0031 User Manual V1 0 - LevelOne - Quality networking ...
3. Select the Network Camera from the survey list and enter the user name and password. The user name and password are assigned as “admin/admin”. - 11 -
4. Setting the Network Camera IP address User can either select simple mode or professional mode for network camera IP setting. If simple mode is selected, the easy configuration program will set up the connection automatically. If professional mode is selected, the user will need to configure the IP manually, The DHCP setting is recommended. If user wants to set IP address manually, please refer to the product user manual. - 12 -
- Page 1 and 2: LevelOne User Manual FCS-0031 Megap
- Page 3 and 4: Table of Contents Before You Use Th
- Page 5 and 6: Before You Use This Product The use
- Page 7 and 8: - 2 -
- Page 9 and 10: The reset button is used to reset t
- Page 11 and 12: Camera Connection Basic Connection
- Page 13 and 14: - 8 -
- Page 15: 2. Do not check the box if user wou
- Page 19 and 20: Access to the Network Camera Check
- Page 21 and 22: Installing plug-in For the initial
- Page 23 and 24: TCP - This protocol guarantees the
- Page 25 and 26: Configuration Click Configuration o
- Page 27 and 28: Flip - Enable to vertically reflect
- Page 29 and 30: RTSP Server To utilize RTSP authent
- Page 31 and 32: Multicast Multicast addressing is a
- Page 33 and 34: DHCP - Get IP address automatically
- Page 35 and 36: TZO TZO - TZO is one kind of the DD
- Page 37 and 38: Detection Setting - Select and enab
- Page 39 and 40: Email Password - Enter the password
- Page 41 and 42: Scheduled Event Click New to open t
- Page 43 and 44: System System Log Log - To send a s
- Page 45 and 46: Device Information Video/Audio Sett
- Page 47 and 48: Maintenance User Management This se
- Page 49 and 50: Configuration This feature allows y
4. Setting the Network Camera IP address<br />
<strong>User</strong> can either select simple mode or professional mode for network camera IP setting. If<br />
simple mode is selected, the easy configuration program will set up the connection<br />
automatically. If professional mode is selected, the user will need to configure the IP<br />
manually, The DHCP setting is recommended. If user wants to set IP address manually,<br />
please refer to the product user manual.<br />
- 12 -