Contents, cont'd. - Intermec

CUT
Chapter 2 Program Instructions
Field of Application Statement activating an optional paper-cutting device.
Syntax CUT
Remarks Obviously, this statement only works with printers fitted with a paper cutter.
A cutter is normally used to cut non-adhesive paper strip or to cut between
labels in a self-adhesive label web.
When a PRINTFEED statement is executed, the printer feeds out a certain
amount of the web according to the printer's setup in regard of startadjust and
stopadjust, as explained in its Installation & Operation manual. Then the
cutter can be activated by a CUT statement.
Example This program orders the printer to print a text and then cut off the web:
10 PRPOS 250,250
20 DIR 1
30 ALIGN 4
40 FONT "Swiss 721 BT"
50 PRTXT "Hello everybody!"
60 PRINTFEED
70
RUN
CUT
Intermec Fingerprint 7.2 – Reference Manual Ed. 3 53