Contents, cont'd. - Intermec

Chapter 3 Image Transfer
UBI10 UBI10 is a combined protocol/file format for image transfer, as opposed to
Intelhex and UBI00 –UBI03 protocols described earlier in this chapter.
UBI10 is used in the various Intermec Windows Drivers.
Protocol Description
!BG ↵
!XA ↵
!YA ↵
!XA | !YA !SBW
!XA | !YA !SBW
!XA | !YA !SBW
. . . . .
!XA | !YA !SBW!EG ↵
!PRINT ↵
Frame Definitions
The width of the image in the STORE IMAGE statement should be given as
a multiple of 16 bits.
!BG Begin graphics.
Always appended by a carriage return character.
!XA Set absolute x position .
The value must be divisible by 8.
Default value is 0.
Once set, it will affect all consecutive y-positions in
the image, until a new x-position is set.
Appended by a carriage return character, unless
followed by a !SBW string on the
same line.
!YA Set absolute y position .
Default value is 0.
Appended by a carriage return character, unless
followed by a !SBW string on the
same line.
!SBW Send one line of bitmap with number of
bytes. is bitmap bytes.
Can be preceded by a new x- and/or y-position.
If appended by a carriage return character, next !SB
set of data will be positioned at the current yposition
incremented by 1.
If no appending carriage return character is used, a
new y-position must be specified for next !SB set of
data.
!EG End graphics.
Always appended by a carriage return character.
!PRINT End page (end frame).
Always appended by a carriage return character.
Intermec Fingerprint 7.2 – Reference Manual Ed. 3 249