Contents, cont'd. - Intermec

PRLINE (PL)
Field of Application Statement for creating a line.
Syntax PRLINE|PL,
Chapter 2 Program Instructions
is the length of the line in dots (max. 6000).
is the line weight in dots (max. 6000).
Remarks The line will be drawn from the insertion point and away according to the
nearest preceding DIR and ALIGN statements. The line runs in parallel with
text printed in the selected direction.
A line can be ALIGNed left, right or centre. The anchor points are situated
at the bottom of the line, i.e. with an increased line weight (thickness), the line
will the grow upward in relation to the selected direction. In the illustration
below, all lines are aligned left.
Example This example draws a 2.5 cm (1") long and 10 dots thick line across the paper
in a 12 dots/mm printer:
10 PRPOS 50,100
20 PRLINE 300,10
30
RUN
PRINTFEED
Intermec Fingerprint 7.2 – Reference Manual Ed. 3 180