Contents, cont'd. - Intermec

PRIMAGE (PM)
Chapter 2 Program Instructions
Field of Application Statement for selecting an image stored in the printer's memory.
Syntax PRIMAGE|PM
is the full name of the desired image including extension.
Remarks An image is positioned according to the preceding PRPOS, DIR and ALIGN
statements. It can be magnified by means of a MAG statement.
For the best printout quality, create and download a larger version of the
image rather than magnifying a smaller one.
All images provided by Intermec have an extension which indicates for
which directions the image is intended:
• Extension .1 indicates print directions 1 & 3.
• Extension .2 indicates print directions 2 & 4.
Even if the Intermec Fingerprint firmware does not require such an extension,
we strongly recommend you to follow the same convention when creating
your own images as to make it easier to select the currect image.
Example This example illustrates the printing of a label containing an image printed
“upside down”:
10 PRPOS 200,200
20 DIR 3
30 ALIGN 5
40 PRIMAGE "GLOBE.1"
50
RUN
PRINTFEED
Intermec Fingerprint 7.2 – Reference Manual Ed. 3 172