Contents, cont'd. - Intermec

PORTOUT ON/OFF
Chapter 2 Program Instructions
Field of Application Statement for setting one of four relay port or one of eight optical ports
on an Industrial Interface Board to either on or off.
Syntax PORTOUT () ON|OFF
is the number of the port to be set:
OUT ports (relay): 201 – 204
OUT ports (optical): 221 – 228
Remarks This statement works with the Industrial Interface Board and is able to control
8 IN ports with opto-couplers, 8 OUT ports with opto-couplers, and 4 OUT
ports with relays. For information on how to read the status of the various
ports, please refer to the PORTIN function.
This feature is intended to allow the execution of the Intermec Fingerprint
program to control various external units like gates, lamps or conveyor belts.
Please refer to the documentation of the Industrial Interface Board for more
information.
Example The relay of OUT port 201 on an Industrial Interface Board is Opened and
then Closed like this:
. . . . .
. . . . .
1000 PORTOUT (201) ON
. . . . .
. . . . .
2000 PORTOUT (201) OFF
. . . . .
. . . . .
Intermec Fingerprint 7.2 – Reference Manual Ed. 3 169