Contents, cont'd. - Intermec

LTS& ON/OFF
Chapter 2 Program Instructions
Field of Application Statement for enabling or disabling the label taken sensor.
Syntax LTS& ON|OFF
Default: LTS& OFF
Remarks The label taken sensor (LTS) is a photoelectric device that can be fitted in the
vicinity of the printer's label outfeed slot and detects if a printed label or ticket
has been removed or not. (Usually, a self-adhesive label is fed out so it still
sticks a little to the backing paper without falling off).
Using the LTS ON statement, you can order the printer to stop the execution
at next PRINTFEED statement until the LTS no longer can detect any label.
Then the PRINTFEED is executed. This is most useful when printing batches
of labels or tickets. As soon as a label is taken, next one is printed and awaits
being taken care of.
The same result can also be obtained in a more cumbersome way by a
program based on the PRSTAT(2) function.
LTS& OFF revokes LTS& ON.
Example 10 LTS& ON
20 FOR A%=1 TO 5
30 B$=STR$(A%)
40 FONT "Swiss 721 BT"
50 PRPOS 200,200
60 PRTXT B$
70 PRINTFEED
80 NEXT
RUN
Intermec Fingerprint 7.2 – Reference Manual Ed. 3 142