9560 Transaction Manager User's Manual - Intermec

9560 Transaction Manager User’s Manual
Using the Slot Scanner
4-6
You can order the 9560 with an internal infrared or visible light slot scanner.
The slot scanner is always triggered and available for input.
To use the slot scanner, simply slide a bar-coded object (such as an
identification badge, envelope, or file folder) through the slot in either
direction. Make sure that:
• the bar code is placed properly on the object.
• the bar code faces up in the scanner slot as shown.
7 8 9
4 5 6
1 2 3
- .
0
Bksp Space Enter
F1 F6
F2 F7
F3 F8
F4 F9
F5 F10
9560
Intermec
A Litton Company
Bar Code Placement
9560-49U
The scanning beam must pass through the entire bar code. The beam path is
0.5 in (1.27cm) from the bottom of the scanning slot. For proper scanning, the
bar code must meet the following specifications:
• at least 0.2 in (0.51 cm) tall with a center line 0.5 in (1.27 cm) from the edge
• parallel to the edge of the card or object that passes through the scanner