9560 Transaction Manager User's Manual - Intermec

9560 Transaction Manager User’s Manual
3-4
WARNING
Connector PCB Parts and Their Locations
Relays
Connector
PCB
Audio
Connector
Sense Jumper
Block
Wand/Slot Scanner
Connector
Terminal
Blocks Laser
Scanner
Connector
Terminal
Connector
Battery
Modem
Connector
Exit IRL
Switch
9560-44U
General Installation Steps
Your system requirements determine some of the installation steps. In general,
follow these steps to install the 9560:
1. Read and follow all warnings and cautions.
2. Turn off the power to the installation area.
3. Route the cables through the mounting plate.
4. Connect the cables for any external devices.
5. Connect the AC power cable. Do not turn on the power.
6. Attach the mounting plate to the housing.
7. Attach the unit to the wall or other surface.
The next sections explain Steps 3 through 7.
Warning
The 9560 uses potentially hazardous AC power. For your safety, you must
understand and follow all safety procedures in this manual and any and all
local building codes. Intermec does not assume liability for personal injury,
death, or equipment damage that occurs as a result of your failure to comply
with the installation procedures contained in this manual.
Avertissement
Comme la 9560 utilise le courant AC, qui est potentiellement hazardeux, il est
impératif que vous preniez en considération la sécurité de toutes personnes
installant ou opérant cet équipement. Il faut lire et suivre les avertissements
cidessous. Intermec n'assume aucune responsabilité en cas de blessures
personnelles, mort ou endommagement d'équipement dûs à l'inobservation de
l'opérateur des procédures d'installation indiquées dans ce manuel.