9560 Transaction Manager User's Manual - Intermec

9560 Transaction Manager User’s Manual
Meeting Power Supply Requirements
2-18
The 9560 contains an internal power supply that automatically adjusts to any
input from 100 to 240 VAC and from 50 to 60 Hz. A standard IEC connector,
located on the chassis and directly below the connector board, accepts various
power cords used throughout the world. To fit properly, a power cord must
have a right-angle connector with a maximum overall height of 1.77 inches (45
mm).
The 9560 is designed to be powered on continuously: there is no power switch.
to remove power from the unit, simply unplug the power cord.
If the reader is configured to resume IRL and the power is disconnected while a
program is running, the program resumes when you restore power.