9560 Transaction Manager User's Manual - Intermec

nugget code39 helconital Getting Started
Bar Code Symbologies
1
The 9560 can automatically discriminate between several bar code symbologies.
You can set the reader to decode any combination of the valid symbologies.
You can save reader memory by enabling only the symbologies required for
your tasks.
The 9560 can decode these bar code symbologies:
• Code 39
• HIBC
• Interleaved 2 of 5 (I 2 of 5; variable length and even, fixed length)
• Code 2 of 5
• Codabar (Standard, American Blood Commission, and Concatenated)
• UPC (including supplemental codes for periodicals)
• EAN
• Code 11
• Code 93
• Code 128
Communications
The 9560 supports RS-232, RS-422, and 4-wire RS-485 multi-drop
communications standards. Current loop can be supported with an external
adapter. Contact your local Intermec service supplier for suggested
manufacturers and ordering instructions.
Status Beeps
The 9560 sounds high or low beeps to indicate status conditions. A single beep
means a valid read, a high pitched beep means immediate transmission to the
host, and a low pitched beep means no transmission. For more information on
beep sequences, see “Starting the 9560” in Chapter 4.
The 9560 standard speaker may not be loud enough in an extremely noisy
environment. You can connect a set of headphones or an external amplifier and
speaker to the audio connector. For more information, see “Attaching Audio
Output Devices” in Chapter 2.
You can attach an external speaker or light to a relay to supplement the
standard speaker. For more information, see “Selecting External Devices” in
Chapter 2.
1-7