9560 Transaction Manager User's Manual - Intermec

Data Entry Commands - Exit Auto-Trigger Mode
Exit Auto-Trigger Mode
Purpose: Sets the scanner to read one label per trigger pull. Enter this command a
second time to return the laser to auto-trigger mode.
Terminal /
Keyboard
Host: $/
8-16
Ctrl J
Scan: Exit Auto-Trigger Mode
*$/*
*$/*
Exit Computer Response Required Mode (CRRM)
Purpose: Accepts user input after a transmission without waiting for a host response.
This data entry command temporarily overrides the configuration command
setting until you scan the Enter CRRM label. Then the reader returns to the
configuration command setting.
Terminal /
Keyboard
Host: .-
Ctrl O
Scan: Exit CRRM
*.-*
*.-*