9560 Transaction Manager User's Manual - Intermec

Data Entry Commands - Enable Clock
Enable Clock
Purpose: Sets the real time clock.
Format: YY/MM/DD:HH:MM
MM/DD:HH:MM
DD:HH:MM
HH:MM
MM
Terminal /
Keyboard
8-10
If data does not match one of these formats, the reader sounds an error
beep and ignores the command.
If you omit data, the display prompts you for each clock element
separately. Enter the digits followed by Enter for each clock element prompt.
Press [Bksp] on the keyboard or scan the Backspace command to remove the
last digit entered.
If you press Enter at a prompt without entering data, the remaining clock
elements are set to the default values.
Ctrl T
Host: /+ data
Scan: 1. Scan this label:
Enable Clock
*/+*
*/+*
2. Scan data from the full ASCII chart in appendix B, “Full ASCII
Chart.”