9560 Transaction Manager User's Manual - Intermec

Data Entry Commands
This chapter provides an alphabetical listing and description of all commands the
9560 recognizes in Data Entry mode.
Using Data Entry Commands
8
You use Data Entry commands to tell the reader to take a specific immediate
action, such as clearing the data buffer or temporarily modifying the reader
operation. The reader responds to Data Entry commands whenever it is in Data
Entry mode. Unless you specifically entered Configuration mode, the 9560 is in
Data Entry mode.
The following Data Entry commands are not saved when the reader loses
power:
• Enter/Exit Computer Response Required mode
• Enter/Exit Full ASCII
• Enter/Exit Auto Trigger mode
These Data Entry commands are saved when the reader loses power:
• Preambles and Postambles
• Enter/Exit Accumulate
Note: When you scan the Default Configuration label, all Data Entry commands are
reset to the factory default.
8-3