9560 Transaction Manager User's Manual - Intermec

Scanner Operation
Configuration Commands - Scanner Operation
Purpose: Defines how the scanner operates when the trigger is pulled. One-shot mode
requires you to pull the trigger each time you want to scan a bar code. The
scanner turns off once it scans the bar code.
Default: One shot
Automatic mode allows you to pull the trigger once and scan several bar
codes. The scanner turns off when you release the trigger.
Syntax: SBdata
Acceptable values for data are:
0 One-shot
1 Auto-trigger
Scan: Scan one of these labels:
One Shot Auto Trigger
*$+SB0$-* *$+SB1$-*
*$+SB0$-* *$+SB1$-*
7
7-47