9560 Transaction Manager User's Manual - Intermec

EOM (End of Message)
Configuration Commands - EOM (End of Message)
Purpose: Defines the EOM character that is attached to the end of a data block to
indicate the end of data transmission to and from the reader. The transmit
and receive EOM can be defined together or separately.
Default: CR LF
Syntax: PFdata Transmit and Receive EOM same
PIdata Transmit EOM
PJdata Receive EOM
data can be one or two ASCII characters
NUL NUL = disable
Scan: 1. Scan one of these labels:
Transmit and Receive
*+/$+PF*
*+/$+PF*
Transmit only
*+/$+PI*
*+/$+PI*
Receive only
*+/$+PJ*
*+/$+PJ*
2. Scan one or two bar codes for data from the full ASCII chart in
Appendix B, “Full ASCII Chart.”
3. Scan this bar code:
Exit Configuration, Save Settings
*$-*
*$ - *
7
7-19