9560 Transaction Manager User's Manual - Intermec

Configuration Commands - Codabar
Codabar
Purpose: Enables or disables decoding of Codabar symbology.
Default: Standard with ABCD start/stop characters
Syntax: CDdata
data must be 2 digits. Acceptable values are:
7-10
First digit:
0 Disabled
1 ABC
2 Standard
3 Concatenated
Second digit:
0 No start/stop transmitted
1 ABCD start/stop transmitted
2 DC1 - DC4 start/stop transmitted
Note: data = 10 is not allowed
Scan: To disable Codabar, scan this label:
Disable Codabar
*$+CD00$-*
*$+CD00$-*
Or: To use Codabar ABC, scan one of these labels:
ABC, ABCD Start/Stop ABC, DC1-DC4 Start/Stop
*$+CD11$-* *$+CD12$-*
*$+CD11$-* *$+CD12$-*