9560 Transaction Manager User's Manual - Intermec

Baud Rate
Configuration Commands - Baud Rate
Purpose: Defines the data transfer speed. It must match the baud rate of the device
(host) that the reader is communicating with.
For Polling Mode D, the baud rate must be 1200 or higher. For Multi-Drop
protocol, the baud rate must be 2400 or higher.
Default: 9600
Syntax: IAdata
Acceptable values for data are:
0 110
1 300
2 600
3 1200
4 2400
5 4800
6 9600
7 19200
Scan: Scan one of these labels:
110 2400
*$+IA0$-* *$+IA4$-*
*$+IA0$-* *$+IA4$-*
300 4800
*$+IA1$-* *$+IA5$-*
*$+IA1$-* *$+IA5$-*
600 9600
*$+IA2$-* *$+IA6$-*
*$+IA2$-* *$+IA6$-*
1200 19200
*$+IA3$-* *$+IA7$-*
*$+IA3$-* *$+IA7$-*
7
7-7