CutMaster 700 - Posch

More documents

Recommendations

Info

Contents 4 8.1 Protective guards 28 8.2 Screw fittings 28 8.3 Hydraulic lines 28 8.4 Saw blade 28 8.5 V-belt tension 28 8.6 Oil level 29 9 Maintenance 31 9.1 Lubrication 31 9.2 Saw blade 31 9.3 Changing the V-belt 34 9.4 Oil changing 37 9.5 Conveyor belt 40 9.6 Cleaning 40 10 Additional equipment 42 10.1 Feed table extension 42 10.2 Loading plate for feed table 43 10.3 16 cm wood stop 43 10.4 Chip extractor connection 44 11 Troubleshooting 45 12 Technical data 47 12.1 Also on "Comfort" models 48 13 Service 49 EC Declaration of Conformity 50
1 1.1 1.2 1.3 1.4 Foreword Thank you for buying our product. This machine has been built in conformity with applicable European standards and regulations. These operating instructions explain how to operate the machine safely and efficiently and how to maintain it. Any person entrusted with the transport, installation, commissioning, operation or maintenance of the machine must have read and understood: ▪ the operating instructions ▪ the safety instructions ▪ the safety information given in the individual chapters. To avoid operator error and ensure problem-free operation, the operating instructions must be available to the operating personnel at all times. Copyright notice All documents are protected by the law of copyright. Documents including excerpts thereof may not be distributed or reproduced nor may their content be communicated without express permission. Liability for defects Read these operating instructions through carefully before putting the machine into operation. We accept no liability for damage or disruptions caused by failure to observe the operating instructions. Claims for liability must be reported as soon as the defect is identified. Claims are null and void for example in the following cases: ▪ improper use ▪ faulty attachments and drives not supplied with the machine ▪ failure to use original spare parts and accessories ▪ conversions or modifications, where not agreed with us in writing We are not liable for defects of wearing parts. Reservations Technical data, dimensions, illustrations of the machine and safety standards are subject to continual change and are therefore not in any circumstances binding in relation to the supplied machine. We accept no liability for printing and typesetting errors. Definitions Operator The operator is the party which operates the machine and uses it for its intended purpose or causes it to be operated by suitable, trained personnel. Operating personnel Foreword 5
Page 1 and 2: Operating Instructions CutMaster 70
Page 3: Contents Contents 1 Foreword 5 1.1
Page 7 and 8: 2 2.1 Safety information Explanatio
Page 9 and 10: 2.4 2.5 The machine must always be
Page 11 and 12: 3 3.1 3.2 General Scope This user m
Page 13 and 14: 5 Three-point linkage connection 13
Page 15 and 16: 3.5 17 Rotational direction of pto
Page 17 and 18: 1 Neutral position 3 Delta position
Page 19 and 20: 4.3 The universal joint shaft must
Page 21 and 22: 5.1.2 5.1.3 "Comfort" model 1 2 1 F
Page 23 and 24: 5.3.2.1 5.3.3 1 Conveyor belt housi
Page 25 and 26: 6 Switching off the machine Before
Page 27 and 28: 7.3 Observe the road traffic regula
Page 29 and 30: 8.6 8.6.1 8.6.2 Oil level To check
Page 31 and 32: 9 9.1 9.1.1 9.2 Maintenance Before
Page 33 and 34: 9.2.1.1 9.2.2 1 Catch 2 Feed table
Page 35 and 36: 9.3.3 9.3.3.1 1 Transmission housin
Page 37 and 38: 9.3.3.3 9.4 9.4.1 Changing the V-be
Page 39 and 40: 9.4.2 9.4.3 Manufacturer Oil specif
Page 41 and 42: ▪ Remove the universal joint shaf
Page 43 and 44: 10.2 10.3 Loading plate for feed ta
Page 45 and 46: 11 Troubleshooting Before carrying
Page 47 and 48: 12 Technical data Type Z Z E11 Driv
Page 49 and 50: 13 Service POSCH product To order s
Page 52: Your Posch-Dealer

CutMaster 700 - Posch

Create successful ePaper yourself

Delete template?

Save as template?