CutMaster 700 - Posch
CutMaster 700 - Posch
CutMaster 700 - Posch
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Maintenance<br />
36<br />
9.3.3.2<br />
Changing the V-belts on comfort electric drives<br />
3<br />
1<br />
3 4<br />
1 Tensioning screw 2 Bearing tensioning screw<br />
3 Tensioner 4 Self-locking hexagon nut<br />
▪ Remove the V-belt guard.<br />
▪ Undo the hexagon nuts of the tensioning screw (using a size 19 spanner) and loosen<br />
the tensioner so that you can remove the V-belts.<br />
▪ Undo the four self-locking M12 hexagon nuts on the electric motor and push the motor<br />
backwards.<br />
▪ Undo the bearing tensioning screw.<br />
▪ Remove the old V-belts.<br />
▪ Fit the new V-belts.<br />
▪ Push the motor forwards until the two coupling halves have engaged.<br />
Ensure that the motor shaft and the bearing shaft are aligned.<br />
▪ Tension the V-belts.<br />
▪ Lock the lock nuts on both tensioning screws.<br />
▪ Check the bearing V-belt tension and adjust if necessary. Then tighten the bearing<br />
tensioning screw.<br />
▪ Refit the V-belt guard.<br />
Before operating, all protective guards must be attached to the machine.