CutMaster 700 - Posch
CutMaster 700 - Posch
CutMaster 700 - Posch
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Transport<br />
26<br />
7<br />
7.1<br />
7.2<br />
Transport<br />
It is vital that the drive is stopped before transport.<br />
Disconnect the machine from the mains.<br />
▪ In addition, pull out the plug of the device.<br />
Disengage the universal joint shaft on the tractor.<br />
▪ Before disengaging, turn the manual throttle to minimum.<br />
When turning off the machine, always be careful of the saw blade runout until the machine<br />
has come to a standstill.<br />
Machines with conveyor belt<br />
Before folding up the conveyor belt, bring it to the 35° position using the control lever.<br />
1. Completely retract the conveyor belt extension using the crank handle.<br />
– If the conveyor belt extension does not retract automatically, gently pull the conveyor<br />
belt.<br />
2. Secure the conveyor belt using the connecting pins.<br />
3. Take the folding pipe out of the holder and swivel downwards.<br />
4. Using the folding pipe, push the conveyor upwards until it is vertical.<br />
– The conveyor belt will stay in the vertical position without needing to be held.<br />
5. Then you will need to go to the other side of the folding pipe and pull the conveyor down<br />
until it is fully folded in.<br />
6. Secure the conveyor belt to the conveyor belt housing using the spring pins.<br />
7. Fix the folding pipe back into its holder.<br />
Width in transport position: 260 cm<br />
Height in transport position: 250 cm<br />
Transporting by three-point linkage on the tractor<br />
▪ Attach the machine to the three-point linkage and use the tractor hydraulics to raise it.<br />
If the tractor's rear lights are obscured, a light must be fitted to the rear of the machine (e.g.<br />
magnetic holder, clip-on light, etc.)