CutMaster 700 - Posch
CutMaster 700 - Posch
CutMaster 700 - Posch
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Operation<br />
20<br />
5<br />
5.1<br />
5.1.1<br />
Operation<br />
At outdoor temperatures below 0°C, let the machine idle for approximately five minutes<br />
to allow the hydraulic system to reach the correct operating temperature (the hydraulic pipes<br />
will then be warm to the touch).<br />
Work operation<br />
Only one person may operate the machine at a time.<br />
Ensure that no other people are in the vicinity of the machine.<br />
"Compact" model<br />
1. Operating the machine<br />
2. Open the conveyor belt.<br />
3. Place the log on the long side of the tilting mechanism and push forwards manually as<br />
far as the stop.<br />
4. Offer the log up to the saw blade using the tilting feed mechanism and cut it.<br />
Because of the different wood types used, the saw blade speed may drop with hard<br />
wood. When sawing, do not press the tilting mechanism beyond the point where the saw<br />
blade speed starts to drop.<br />
If the motor cut-out has switched the electric motor off in response to an overload, the motor<br />
must not be switched back on immediately. It may only be switched back on once it has a<br />
surface temperature of approx. 30°C.<br />
▪ The cut log drops onto the conveyor belt from where it is discharged.
Change language