CutMaster 700 - Posch

More documents

Recommendations

Info

Manufacturer 2 Manufacturer POSCH Gesellschaft m.b.H. Paul-Anton-Keller-Strasse 40 A-8430 Leibnitz Tel.: +43 (0) 3452/82954 Fax: +43 (0) 3452/82954-53 E-mail: leibnitz@posch.com http://www.posch.com © Copyright by POSCH Gesellschaft m.b.H., Made in Austria Please be sure to fill this in before starting. Then you can be sure that this document relates to your machine, so if you have any queries you will be given the correct information. Machine number:.............................................................................. Serial number:..................................................................................... POSCH Austria: 8430 Leibnitz, Paul-Anton-Keller-Strasse 40, telephone: +43 (0) 3452/82954, fax: +43 (0) 3452/82954-53, e-mail: leibnitz@posch.com POSCH Germany: 84149 Velden/Vils, Preysingallee 19, telephone: +49 (0) 8742/2081, fax: +49 (0) 8742/2083, e-mail: velden@posch.com
Contents Contents 1 Foreword 5 1.1 Copyright notice 5 1.2 Liability for defects 5 1.3 Reservations 5 1.4 Definitions 5 1.5 Operating instructions 6 2 Safety information 7 2.1 Explanation of symbols 7 2.2 General safety information 8 2.3 Safety information for saws 8 2.4 Safety instructions for conveyor belts 9 2.5 Noise 9 2.6 Remaining risks 10 2.7 Proper use 10 2.8 Incorrect use 10 3 General 11 3.1 Scope 11 3.2 Description 11 3.3 The most important components of the machine 12 3.4 Labels and their meanings 14 3.5 Set-up 15 4 Start-up 16 4.1 Driven by electric motor (type E) 16 4.2 Driven by tractor via universal joint shaft (type PZG) 18 4.3 Electric motor or universal joint shaft drives 19 5 Operation 20 5.1 Work operation 20 5.2 Adjusting the wood stop 22 5.3 Conveyor belt 22 6 Switching off the machine 25 7 Transport 26 7.1 Machines with conveyor belt 26 7.2 Transporting by three-point linkage on the tractor 26 7.3 Lifting with a crane 27 8 Checks 28 3
Page 1: Operating Instructions CutMaster 70
Page 5 and 6: 1 1.1 1.2 1.3 1.4 Foreword Thank yo
Page 7 and 8: 2 2.1 Safety information Explanatio
Page 9 and 10: 2.4 2.5 The machine must always be
Page 11 and 12: 3 3.1 3.2 General Scope This user m
Page 13 and 14: 5 Three-point linkage connection 13
Page 15 and 16: 3.5 17 Rotational direction of pto
Page 17 and 18: 1 Neutral position 3 Delta position
Page 19 and 20: 4.3 The universal joint shaft must
Page 21 and 22: 5.1.2 5.1.3 "Comfort" model 1 2 1 F
Page 23 and 24: 5.3.2.1 5.3.3 1 Conveyor belt housi
Page 25 and 26: 6 Switching off the machine Before
Page 27 and 28: 7.3 Observe the road traffic regula
Page 29 and 30: 8.6 8.6.1 8.6.2 Oil level To check
Page 31 and 32: 9 9.1 9.1.1 9.2 Maintenance Before
Page 33 and 34: 9.2.1.1 9.2.2 1 Catch 2 Feed table
Page 35 and 36: 9.3.3 9.3.3.1 1 Transmission housin
Page 37 and 38: 9.3.3.3 9.4 9.4.1 Changing the V-be
Page 39 and 40: 9.4.2 9.4.3 Manufacturer Oil specif
Page 41 and 42: ▪ Remove the universal joint shaf
Page 43 and 44: 10.2 10.3 Loading plate for feed ta
Page 45 and 46: 11 Troubleshooting Before carrying
Page 47 and 48: 12 Technical data Type Z Z E11 Driv
Page 49 and 50: 13 Service POSCH product To order s
Page 52:
Your Posch-Dealer
show all

CutMaster 700 - Posch

Create successful ePaper yourself

Delete template?

Save as template?