16.08.2013 Views

PACKAGE : I Bid Document VOLUME : II - Public Health Engineering

PACKAGE : I Bid Document VOLUME : II - Public Health Engineering

PACKAGE : I Bid Document VOLUME : II - Public Health Engineering

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Filters House and associated plant and equipments:<br />

Settled water from the clarifier shall pass through a battery of rapid gravity sand<br />

filters and then to the filtered water reservoir being chlorinated enroute. 2 filters are<br />

to be provided. Each filter shall be made up of two sections. Each section is 4.5m<br />

wide and 5.8m long. Filter cleansing shall be effected by first agitating the beds<br />

with compressed air and back washing at a wash rate of 600 LPM /m² of bed<br />

surface area. The under-drain system comprises A.C. pressure pipe strainers of<br />

80mm bore perforated at intervals for admission of filtrate and egress of agitating<br />

air and back-wash water. Strainers fit into RGC Tee pieces opening into a header<br />

channel below the floor of the bed, connected to the filter outlet pipe.<br />

Clear water reservoir :<br />

Filtered water from each of the 2 filters shall flow into the common channel<br />

chlorinated enroute into the reservoir having the capacity of 1000 KL. Water from<br />

the reservoir shall be simultaneously transferred to the supply main maintaining<br />

maximum pressure in the reservoir at all time.<br />

Disinfection :<br />

For sterilization of the filtrate, chlorination with chlorine solution shall be used. The<br />

flow of chlorine from the chlorine cylinder into the absorption tower shall be<br />

adjusted and control by the chlorinator control panel.<br />

Associated plant & equipments and instrumentations:<br />

All butterfly/sluice/gate valves for the plant shall be of motorized actuator and<br />

position indicator for compatibility with the proposed automation control system.<br />

The MCC for different drives viz. clarifier, flocculator, flash mixer, alum mills,<br />

lime mills, air blower, backwash pump including instrumentations equipments shall<br />

also be compatible with the proposed automation & control system.<br />

Motor control centre :<br />

The MCC shall be Free standing, floor mounted, single front, non-draw-out type,<br />

with aluminium busbars. Each MCC shall be provided with a single incomer having<br />

SFU of 400A rating. Indication lamps for R, Y, B phases together with Ammeter &<br />

Voltmeter shall be provided at the incomer panel. Outgoing feeders will be having<br />

DTS : Detailed Tender Specification. Page 241

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!