Accessories for the Crafter.

Volkswagen Genuine Towing ball
The individual towing ball is suitable for vehicles with an
end crossmember or mounting frame, with a hole pattern
of 56 x 83 mm.
Art. no. 2E0 092 770
Volkswagen Genuine Drawbar coupling
Extend the Crafter‘s transport capabilities. The coupling of
a trailer with a ring eye is simplified by the funnel-shaped
insertion guide, so that the vehicle rear is protected against
undesirable damage. Can only be used in conjunction with
the screw set.
Art. no. 2E0 092 145
Volkswagen Genuine Combined coupling
The combined coupling comprises a ball head mounted on
a four-hole pattern with an additional upper securing hook,
which prevents an unintentional loss of the trailer. As such,
a trailer with a ring eye can also be pulled by the Crafter.
Art. no. 2E0 092 145 A
Volkswagen Genuine Rear step
Make entering and exiting the vehicle even easier and safer with
the rear step - despite the height of the rear doors. Not suitable
for flatbed vehicles. Can only be used in conjunction with the
mounting frame.
Art. no. 2E0 092 200
Transport – 13