user manual - AWE Europe
user manual - AWE Europe
user manual - AWE Europe
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
ENGLISH<br />
Getting Started Connections Setup<br />
Playback Remote Control Multi-Zone Information Troubleshooting<br />
A1 Setup Lock<br />
Protect settings from inadvertent change.<br />
[Selectable items] ON OFF<br />
• When “Setup Lock” is set to “ON”, the settings listed below can<br />
no longer be changed. Also, “SETUP LOCKED!” is displayed if you<br />
attempt to operate related buttons.<br />
⋅ GUI menu operations<br />
⋅ RESTORER<br />
⋅ Night Mode<br />
⋅ Parameter<br />
⋅ Room EQ<br />
⋅ Channel Level<br />
⋅ Audio Delay<br />
• To cancel the setting, press the MENU button to re-display the “Setup<br />
Lock” screen, then change the setting to “OFF”.<br />
A2 Maintenance Mode<br />
This sets the function for maintenance by a DENON<br />
serviceperson or installer. (For professional use only.)<br />
This function allows a DENON serviceperson or installer to check the<br />
AVR-3808’s status and make settings via the Internet.<br />
NOTE<br />
Only use this function if so instructed by a DENON serviceperson or<br />
installer.<br />
A3 Firmware Update<br />
Update the fi rmware of the receiver.<br />
[Selectable items]<br />
Start :<br />
Execute the update process.<br />
When updating starts, the power indicator lights red. “Updating<br />
zzz” is shown on the display during updating. Once updating is<br />
completed, “Updating complete” is displayed.<br />
“Latest fi rmware” is displayed when the fi rmware is the latest<br />
version.<br />
b If the display reads as shown below, check the settings and network<br />
environment, then update again.<br />
Display Description<br />
Updating failed Updating failed.<br />
Login failed Failure to log into server.<br />
Server is busy Server is busy. Wait a while then try again.<br />
Connection failed Failure connecting to server.<br />
Regist failed Failure registering to server.<br />
NOTE<br />
• Connection to the network and specifi c settings are required to<br />
update the fi rmware. For details, see page 20, 32, 33.<br />
• Do not turn off the power until updating is completed.<br />
• Normally there is no need to use this function, aside from the cases<br />
described below.<br />
⋅ The Firmware Update function is only used for updating the<br />
fi rmware (free or for a charge) via the Internet, for example for the<br />
purpose of adding functions to the AVR-3808 in the future.<br />
⋅ Information regarding the Firmware Update function will be<br />
announced on the DENON web site each time related plans are<br />
defi ned.<br />
⋅ A broadband connection to the Internet is required to use this<br />
function (v page 20).<br />
⋅ Even with a broadband connection to the Internet, approximately 1<br />
hour is required for the updating procedure to be completed. Once<br />
updating starts, normal operations on the AVR-3808 cannot be<br />
performed until updating is completed.<br />
Furthermore, updating the fi rmware may reset the backup data for<br />
the parameters, etc., set for the AVR-3808.<br />
Language<br />
This sets the language used on the display<br />
screens.<br />
F Menu tree F<br />
Manual Setup<br />
Language<br />
[Selectable items]<br />
English<br />
Español<br />
Deutsch<br />
Français<br />
Nederlands Svenska<br />
Operating from the main unit<br />
Italiano<br />
b The GUI menu is not displayed when performing this setting.<br />
q Press and hold the STATUS and RETURN buttons for at least 3<br />
seconds.<br />
“Video Format” appears on the display.<br />
w Use the ui button to set “GUI Language”.<br />
e Use the o p button to make the setting.<br />
r Press the ENTER, MENU or RETURN button to complete the setting.
Change language