Xilinx CPLD Libraries Guide

About Design Elements
LD16
Macro: Multiple Transparent Data Latch
Supported Architectures
This design element is supported in the following architectures only:
• XC9500XL
• CoolRunner XPLA3
• CoolRunner-II
Introduction
This design element has 16 transparent data latches with a common gate enable (G). The data output (Q) of the
latch reflects the data (D) input while the gate enable (G) input is High. The data on the (D) input during the
High-to-Low gate transition is stored in the latch. The data on the (Q) output remains unchanged as long as
(G) remains Low.
This latch is asynchronously cleared, outputs Low, when power is applied. For CPLD devices, you can simulate
power-on by applying a High-level pulse on the PRLD global net.
Logic Table
Inputs Outputs
G D Q
1 D D
0 X No Change
fl Dn Dn
Design Entry Method
This design element is only for use in schematics.
Available Attributes
Attribute Type Allowed Values Default Description
INIT Binary Any 16-Bit Value All zeros Sets the initial value
of Q output after
configuration
For More Information
• See the appropriate CPLD User Guide.
• See the appropriate CPLD Data Sheets.
CPLD Libraries Guide
ISE 10.1 www.xilinx.com 427