Xilinx CPLD Libraries Guide

About Design Elements
CJ5CE
Macro: 5-Bit Johnson Counter with Clock Enable and Asynchronous Clear
Supported Architectures
This design element is supported in the following architectures only:
• XC9500XL
• CoolRunner XPLA3
• CoolRunner-II
Introduction
This design element is a clearable Johnson/shift counter. The asynchronous clear (CLR) input, when High,
overrides all other inputs and forces the data (Q) outputs to logic level zero, independent of clock (C) transitions.
The counter increments (shifts Q0 to Q1, Q1 to Q2,and so forth) when the clock enable input (CE) is High during
the Low-to-High clock transition. Clock transitions are ignored when (CE) is Low.
The Q4 output is inverted and fed back to input Q0 to provide continuous counting operation.
This counter is asynchronously cleared, outputs Low, when power is applied. .
Logic Table
Inputs Outputs
CLR CE C Q0 Q1 through Q4
1 X X 0 0
0 0 X No change No change
0 1 › !q4 q0 through q3
q = state of referenced output one setup time prior to active clock transition
Design Entry Method
This design element is only for use in schematics.
For More Information
• See the appropriate CPLD User Guide.
• See the appropriate CPLD Data Sheets.
CPLD Libraries Guide
ISE 10.1 www.xilinx.com 213