S-MIZE High Speed Camera - AOS Technologies AG

PRODUCT LEAFLET TECHNICAL SPECS APPLICATION NOTE
Applications
The S-MIZE is particularly suited for all applications where a compact
and portable yet robust camera is essential:
• Automotive safety testing – on-board full size crash vehicle or
sled body structures where the camera is fitted into tight areas
like door panels or the pedal area
• Industrial or military applications with Hi-G shocks and limited
space – like eccenter presses and similar devices
Why the S-MIZE
• Perfectly balanced performance – 1,000 fps @ 900 x 700 resp.
500fps@1280x1024 provides you with excellent image quality
and a frame rate suitable for a wide range of automotive test
applications
• Robust design – designed for many years of rough handling in
HiG-applications (milled aluminum)
• Simple to use – the camera control software is easy to use, even
for novices and occasional users; operator training is not
necessary – yet provides full control of the camera settings and
functions
S-MIZE High Speed Camera
Imaging for smart decisions
S-MIZE – the ruggedized, ultra compact high speed camera
for automotive safety testing and harsh industrial as well as research applications.
More light sensitive than ever.
•
Unique features
• Simple and easy to integrate – due to its built-in PowerPC,
the S-MIZE can duplicate the control- and status lines of a
film camera. This plus the range of available connectors make
the integration into a given environment, i.e. by replacing an
older film-based camera, a cinch. Modifications on the aircraft
as well as on the test routine are kept to a minimum.
• High Sensitivity – the S-MIZE offers a high light sensitivity,
allowing to use high lens apperture numbers for an extended
depth of field resp. using short shutter times to minimize
motion blur of fast moving objects.
• Autonomous operation – the built-in battery allows you to
use the camera without external power cables and powersupplies.
No risk that the camera interferes with the aircrafts
power system.

Car crash (on board)
S-MIZE (standard model)
S-MIZE 90 with data- and I/O-connectors mounted sidewise
(90 deg. off the standard model with connectors on the back plate)
Your local AOS partner:
Specifications are subject to change without prior notice – v08.2012
AOS Technologies AG, Taefernstrasse 20,
CH-5405 Baden-Daettwil
Tel. +41 (56) 483 3488, Fax + 41 (56) 483 3489
info@aostechnologies.com
www.aostechnologies.com
Technical key specifications
Image Sensor Progressive CMOS, 1280 x 1024 pixels, mono or color
Sensor size (@ full resolution) 17.82 x 14.33 mm, 14 µm pixel size
Light sensitivity ISO 3200 (monochrome), ISO 1600 (color)
Dynamic range 5-, 8- or 10 bit, adjustable by user
Gain control User selectable, High Dynamic Range (HDR) mode
Frame rate at full resolution 500 fps @ 1280 x 1024 pixels
Typical fps/resolution settings 1280 x 1024 @ up to 500fps
900 x 700 @ up to 1’000fps
800 x 600 @ up to 1’250fps
Max. frame rate 100’000 fps
Shutter type Global electronic shutter
Shutter exposure times 4 µsec to 1/frame rate
Image memory Built-in DRAM, circular buffer
Sequence length 2 sec @ 1280 x 1024 / 500fps (1.3 GB memory)
4 sec @ 1280 x 1024 / 500fps (2.6 GB memory)
8.1 sec @ 1280 x 1024 / 500fps (5.2 GB memory)
16.2 sec @ 1280 x 1024 / 500fps (10.4 GB memory)
Data Interface Gigabit Ethernet (1’000 Mb/s)
RJ45, other connectors on request
Frame synchronisation
Multi-camera operation
Sync in, Sync out (TTL)
Yes
Memory Interface Built-in CF interface (optional),
accepting CF cards for non-volatile data storage
Power supply 12 VDC (9...16VDC),
other voltage ratings on request
Power consumption 14 W (w/o data link), 18 W (with data link)
Battery Built-in, rechargeable NiMH battery
allowing 15 minutes camera operation.
Optional ‘extended battery pack’ available
Extended battery pack (optional) 2.5 hours battery capacity
Video Interface (optional) SDI (digital) or PAL/NTSC (analog)
Operating temperature
Storage temperature
0 … +45 ºC (32 …113 ºF)
-40 … +70 ºC (-40 …158 ºF)
Shock resistance 100G for 15msec, 3 axis , up to 200G during short peaks
Size, weight (standard model) 74 x 71 x 80 mm, 700 gr
92 x 71 x 67mm, 700gr (model ‘90’)
I/O Connector
1 GND (-)
2 V In (In)
3 Remote On (In)
4 Sync In (In)
5 Sync Out (Out)
6 Set-to-Rec (In)
7 Trigger (In)
8 Strobe (Out)
9 Armed (Out)
10 Triggered (Out)
11 Status 1 (In/Out)
12 Status 2 (In/Out)
13 Status 3 (In/Out)
14 Status 4 (In/Out)
LEMO Type: FGG.2B.314.CLAD82Z
ODU Type: S22LOC-P14MFGO-8200
10 1
9
11
2
8 14 12 3
7
13
4
6 5
different pinout configuration and connectors on request
CE In compliance with relevant standards